- Details
-
Overview
application
● Realize the connection of single-phase or three-phase insulated cables and transformers, switchgears, branch boxes and other equipment through 630A prefabricated connectors.
● Suitable for indoor and outdoor installation.
● Maximum system voltage 36kV
● Continuous rated current 630A (900A overload can last 8 hours)
● Cable characteristics
-Polymer insulation (XLPE, ERP, etc.)
-Copper or aluminum conductor
-Has semi-conductive or metal shield
-Conductor size: 12kV 25-400mm2 24kV 25-400mm2 36kV 25-300mm2
performance
● When mated with a suitable sleeve or plug, it provides a fully shielded and fully sealed detachable connection
● Can be operated under water and other harsh conditions for a long time
● The built-in capacitance test point is used to determine the live state of the line, and it must be used in conjunction with the live display
● No minimum safety distance between phases
● The installation can be vertical, horizontal or any angle
Product application examples
Electrical performance
Electrical parameters
installation
● No special tools, tape or filling
● The cable connector is energized immediately after being installed to the relevant parts
● Provide conventional assembly parts and installation instructions (please contact our company for special requirements)
Main packaging
● 630A European front connector body
● Insulator (including semi-conductive sealing cap)
● Dust cap (non-insulated protective cap)
● Stress cone
● Crimp terminal
● Stud bolt
● Copper ground wire, silicone grease, cleaning paper
● Installation scale card, installation instruction manual
● Product certificate
Product packing parameters
3 pcs / box Weight: 5.64 kg Volume: 30cm × 25cm × 22 cm
Product structure
1. The tinned copper bolts of the double-headed bolts ensure that the conductors and bushings are closely matched
2. The unique formula and mixing technology of the insulating layer ensure the high quality of the prefabricated EPDM insulating rubber
3. Insulator The epoxy resin insulator contains threaded metal parts to ensure a close fit with the stud bolt 4. Capacitance test point The capacitance test point is used to test whether the line is live
5. Test point cover The prefabricated EPDM conductive test point cover protects the test point and grounds it in normal operation
6. Prefabricated EPDM conductive rubber with inner semiconducting layer effectively controls electrical stress
7. Stress cones of different sizes are used with cable joints to ensure water sealing and cable stress relief
8. The grounding eye is pre-injected into the outer shield for the connection of the grounding wire
9. The prefabricated EPDM conductive rubber of the outer semiconducting layer overlaps with the cable shielding layer to make the shielding continuous and ensure that the outer semiconducting layer is grounded
10. Crimping terminal All copper or copper aluminum crimping terminal is suitable for copper or aluminum conductor
Order information
Tel：0512-36870148
Phone：18015537807
Add：No. 733, Nanbang Road, Development Zone, Kunshan City, Jiangsu Province
E-mail：sky.si@nanxuanchina.com
scan it
Copyright © 2023 Kunshan Nanxuan Electronic Technology Co., Ltd. Copyright Designed By：www.300.cn SEO